Recent Posts

Pages: 1 2 3 [4] 5 6 ... 10
31
ezPower / Re: Bar Software
« Last post by ronaldrwl on August 20, 2021, 01:51:15 PM »
It's been used at many bars.  It does have some features for bars but not everything.  What features are important to you?

Try the Restaurant version demo.  Open the Settings / Setup Starter and select Bar Mode.  This will give you one way to run a bar with Tabs and open tickets.
32
ezPower / Bar Software
« Last post by drivethru on August 19, 2021, 05:35:23 AM »
Has anybody used this software at a bar?
33
ezPower / Re: Percentage discounts
« Last post by ronaldrwl on July 17, 2021, 04:00:41 AM »
The "Buy 1 Get 1 Discounted by Category%" would be selected for each product it applies to.
34
ezPower / Re: Percentage discounts
« Last post by HotSpotComputers on July 16, 2021, 08:16:20 PM »
Okay I will try this when I am there next.

Does this have to be applied to each product individually?
He has 11 flavours with 3 different sizes and another category for half half pizzas
35
ezPower / Re: Percentage discounts
« Last post by ronaldrwl on July 15, 2021, 04:32:33 AM »
The Category discount you were using works on 2 or more.  Or 4 or more...  So, the 3rd pizza would be discounted. 
I would try the "Buy 1 Get 1 Discount by Category%".
If that doesn't work then they would probably need to create new Discounted sku's for those specials.
36
ezPower / Percentage discounts
« Last post by HotSpotComputers on July 15, 2021, 12:42:51 AM »
Hi guys,

I am helping out an old client of ours, we set up his 8 license v14 ezpos a few years ago now for his Pizza Shop

He has recently changed his menu offering a few different deals throughout the week

Tuesday and Wednesday he offers any 2 pizza's 15% discount (discount doesn't apply on 3rd pizza but would apply if they purchase 4 pizzas)
Thursday and Sunday any pizza 10% off
Any Day purchase 2 pizzas or more 10%

These discounts only apply to the Pizza and not the total sale.
Eg. If they purchase drinks, garlic bread and a pasta he doesn't want them to be discounted in that sale

Any advice on the best way to set this up?

I have tried the discount option in category but i can't seem to get it to work.

Thank you,

Luke
37
ezPower / Re: Cash Drawer - ?same settings? different actions Server and Slave
« Last post by JohnBlyth on June 11, 2021, 05:32:50 AM »
Thanks for the additional information. The DT-100U USB works as a virtual Com Port via USB. One issue I came across in the past day is the preset com port in Windows Device Manager had changed itself from Com Port 6 to 1. It seems to work reliably with sales, and I will check if I am still getting  com port error with a Z-Out.

I will research further with the second till early next week and advise...
38
ezPower / Re: Cash Drawer - ?same settings? different actions Server and Slave
« Last post by ronaldrwl on June 11, 2021, 05:05:57 AM »
One issue that I didn't see at first is a drawer can Not be connected directly to a USB port in almost all cases.  It must be a serial port.  I've seen serial port emulations work and many not work.  The software is writing directly to the COM port and it will not work if it's configured as a USB port.  To use a USB port the drawer must be connected to the printer and the printer is connected to the USB port.  This is the standard connection method.  In the Settings / Printer & Equipment what setting are you using?  The USB setting is for a special M-S cashdrawer.  The standard open method is "Open connected to Printer".  This has the drawer connected to the printer.
39
ezPower / Re: Cash Drawer - ?same settings? different actions Server and Slave
« Last post by JohnBlyth on June 09, 2021, 02:53:25 PM »
Thanks Ronaldrwl,

I was using the same  DT-100U USB device on both PCs as a test and with two separate cash drawers, but with the comm port number set appropriately on each PC. As an aside, with this device, do I still need to use the serialsend applet, or is the device itself generating the code pulse? I presume it is the later?????

I upgraded to the Server version on the 16th of February this year - Transaction ID 06J498726E797993C.

(EDIT:- I have two Ez Powers in my name. One SINGLE for the Golf Club. One SERVER for the Yacht Club ;-)
40
ezPower / Re: Cash Drawer - ?same settings? different actions Server and Slave
« Last post by ronaldrwl on June 09, 2021, 06:56:57 AM »
Do both the computers have the same usb device?
I show you have the single computer version?
The "File / Open Drawer", Open Drawer button, z-out all use the same code to open the drawer.
Pages: 1 2 3 [4] 5 6 ... 10