Recent Posts

Pages: [1] 2 3 ... 10
1
ezPower / Info electronic drawer
« Last post by belva on November 09, 2023, 10:11:43 AM »
good morning mr Ronald we would like to connect to the ezpos software an electronic drawer, but the manufacturer of this electronic drawer asks us if your database can be read with external software, where it is located,
in what format can it be read and whether it can be read by multiple devices at the same time, thanks for reply
2
ezPower / Re: info to print a purchase order
« Last post by ronaldrwl on May 26, 2023, 04:46:49 AM »
Those reports are the large format only.  The only reports that fit on 3" will come up as a 3" report on the monitor.  For example, the z-out is 3".
There is no Italian language version.
Yes, you can purchase the software.
Partial means that only the scales screen is translated (mostly).
3
ezPower / Re: info to print a purchase order
« Last post by belva on May 24, 2023, 09:41:54 AM »
when I select "category" --> "by product" in the report center, a screen comes out as an attached screenshot, but I don't know where the small 80mm format is; moreover, can the "purchase order", which I enclose, be printed? how?
I'm in Italy, is it possible to buy the software? the nation Spain is the only market in Europe that I can select during the purchase phase, what does it mean (partial) that appears with the spain market?
4
ezPower / Re: Loading v14 network
« Last post by ronaldrwl on May 24, 2023, 05:05:28 AM »
Our computer (reg #1) has been having problems and they seem to be related to a bad (corrupted) drive. Bought new computer and I'm trying to load everything on it so we can swap out the old one.
I have loaded Ver14 network onto it but have not been able to restore the backup on the new computer. I know it's something simple but it's beyond me. We are currently using the old (soon to be replaced) computer because we are still open for business. I was hoping to get things up and running on the new one so we could just bring it up after we close so we can start fresh the next day.

Is setting up the new computer as #1 while we still have the one in front set as #1 causing the problem?
No.
 If so is there any way to set things up so it is a relatively painless and simple process?
NA
Also do I just use the backup to install the information onto the new computer?
You can just copy the "ezp" folder to the new computer.

Sorry but I'm just stuck as how to do this (as usual).

I assume the "ezp" files that I backup daily is what needs to be imported or installed on the new computer. If so at least I am kind of on the right track.
Yes

I hope you can understand what I am trying to say.

Thank you Ronald in advance for the help.
5
ezPower / Re: info to print a purchase order
« Last post by ronaldrwl on May 24, 2023, 05:02:13 AM »
When you view reports, they will either be the narrow roll paper format (~3 columns).  Or the full sheet format (up to 10 columns).  The narrow format should work on your 80mm paper.  The supplier report will not fit.
6
ezPower / Loading v14 network
« Last post by thecaptive on May 21, 2023, 12:50:33 PM »
Our computer (reg #1) has been having problems and they seem to be related to a bad (corrupted) drive. Bought new computer and I'm trying to load everything on it so we can swap out the old one.
I have loaded Ver14 network onto it but have not been able to restore the backup on the new computer. I know it's something simple but it's beyond me. We are currently using the old (soon to be replaced) computer because we are still open for business. I was hoping to get things up and running on the new one so we could just bring it up after we close so we can start fresh the next day.

Is setting up the new computer as #1 while we still have the one in front set as #1 causing the problem? If so is there any way to set things up so it is a relatively painless and simple process? Also do I just use the backup to install the information onto the new computer?

Sorry but I'm just stuck as how to do this (as usual).

I assume the "ezp" files that I backup daily is what needs to be imported or installed on the new computer. If so at least I am kind of on the right track.

I hope you can understand what I am trying to say.

Thank you Ronald in advance for the help.
7
ezPower / info to print a purchase order
« Last post by belva on May 19, 2023, 10:28:44 AM »
I would like to know if orders to suppliers and reports for exemple in caregory by product,  can be printed on a custom kube printer with 80x80mm roll paper, thanks
8
ezPower / Re: Asking for a password when ready to finalize a sale
« Last post by ronaldrwl on April 30, 2023, 11:45:24 AM »
If you don't have the password use the one I emailed to you.  Open the Managers window and Settings / Security.  Use the p/w to turn security off or to enter your own p/w.
9
ezPower / Asking for a password when ready to finalize a sale
« Last post by CareTek on April 29, 2023, 10:07:56 PM »
Get this issue after installing ez power on 2nd station
10
ezPower / Re: At Cost Setting Not Working
« Last post by VaporPhoxxe on April 14, 2023, 07:13:57 AM »
On items that use the modifier for pricing, all Product Price levels are set to $0.00.
When a given item is picked and the size picked from the modifier pop up, the item is priced correctly for a regular customer set to retail.
When a given item is picked and the size picked from the modifier pop up, the item price is set to the selected size price plus the cost set in the product window for an employee purchase having their price level set to At Cost.

This has always worked correctly in the past.
There were no changes made other than the usual adding new products. This occurs with products that have been in the system, in some cases for years and now also new products that use the Modifier to select pricing.
Pages: [1] 2 3 ... 10