Denver Research
General Category => ezPower => Topic started by: ausad178 on April 02, 2018, 06:29:46 PM
-
Hi Ronald,
I see some stores they have a hardware on the table then staff just put the product in weigh and scan automatic
What they called this hardware and how to connect to computer and software
Thanks
-
It's just a scale and scanner combined. The scale will (must) connect to the computers serial port. And the scanner connects to a usb port. The higher end scanners will read the barcode label without having to press a trigger. You can use any of these type of scanners as far as we've tested. We have tested Weigh Tronix and CAS PD-II serial port scales.